Security Guides

SonicWall Gen 6 firewalls have reached end of support (notice of 18 November 2026): no patches for any severity. What to do today

SonicWall says Gen 6 and 6.5 firewalls (SonicOS 6.x) get no firmware or security patches, even for critical flaws. End-of-support dates by model and what to do.

Published 2026-11-21 Updated 2026-11-21 Last verified 2026-11-21 8 min read
On this page

For: anyone who runs a SonicWall firewall (TZ, SOHO, NSA, NSa, SuperMassive, NSsp or NSv series), especially as a VPN or office gateway, and the IT staff, resellers and maintenance contractors who look after them. This article is based on SonicWall's product advisory of 18 November 2026. It is not about a specific vulnerability and does not cover how to attack.

Developing: this article will be updated as more is published

Who is affected

anyone who runs a SonicWall firewall (TZ, SOHO, NSA, NSa, SuperMassive, NSsp or NSv series), especially as a VPN or office gateway, and the IT staff, resellers and maintenance contractors who look after them.

Confirmed so farSee the table ↓
  • Scope
  • End-of-support dates
  • Patches
Not yet confirmed
  • Whether any specific Gen 6 vulnerability is being exploited because of this (the notice names none)
  • Whether SonicWall changes its position for particular models (the notice says there are no exceptions)
  • How many Gen 6 units are still exposed to the internet (not stated)
What to do nowSee the steps ↓
  1. List every Gen 6 and Gen 6.5 unit
  2. Prioritise units that face the internet
  3. Apply SonicWall's interim steps
2 more
  1. Watch the logs
  2. Plan the replacement with a partner
Where to verify (source)All sources ↓
SonicWall
Last checked
As of November 21, 2026 (JST)
Follow-up plans and what we checked

SonicWall published the advisory on November 18, 2026 (last updated the same day). It names no new CVE. It says SonicWall expects internet-facing Gen 6 firewalls to be actively targeted, and that the end-of-support dates come from its Product Life Cycle tables.

What to do today

1

List every Gen 6 and Gen 6.5 unit

Check the model and the SonicOS version of each firewall. SonicOS 6.x means Gen 6 or 6.5. Include spare units, branch offices, virtual NSv machines, and firewalls run for you by a contractor. Ask your reseller or contractor for their list as well.

2

Prioritise units that face the internet

SonicWall asks you to start with units exposed to the internet or providing remote access (SSL VPN, WAN management). These are the ones attackers can reach without being inside your network.

3

Apply SonicWall's interim steps

Disable WAN management (HTTPS, SSH and SNMP on WAN interfaces). Disable SSL VPN or restrict it to known source addresses. Enforce multi-factor authentication on remote-access and admin accounts and reset local passwords. Disable unused services and interfaces. SonicWall says these steps reduce exposure and do not make an unsupported firewall secure. If you turn off SSL VPN, work out first how staff will connect instead.

4

Watch the logs

Check for unusual logins, configuration changes and traffic, as SonicWall advises. Send the firewall logs to a place the firewall cannot overwrite, so that evidence survives if the device is compromised. If you find something suspicious, see how to check for intrusion.

5

Plan the replacement with a partner

SonicWall recommends a Gen 8 firewall running SonicOS 8 and says supported SonicOS 6.5 settings can be imported through the in-product import or the NSM Migration App. Set a date and a budget now. If a different vendor suits you better, the same list of Gen 6 units gives you the scope.

End-of-support dates by model

SonicWall Gen 6 and 6.5 end of support (from SonicWall's notice)
Scope
All Gen 6 and Gen 6.5 firewalls running SonicOS 6.x, including Gen 6 NSv virtual firewalls
After end of support
No firmware updates or security patches, whatever the severity. Support cannot be bought or renewed. No further firmware
Source of dates
SonicWall Product Life Cycle tables, as quoted in the notice
ModelGenerationEnd of support
TZ350, TZ350W, TZ500, TZ500W, SOHO 250, SOHO 250WGen 6 / 6.5October 1, 2026
NSA 4600, NSA 5600, NSA 6600Gen 6October 1, 2026
NSa 4650, NSa 5650, NSa 6650Gen 6.5October 1, 2026
TZ400, TZ400W, TZ600, TZ600P, NSA 3600Gen 6August 1, 2026
NSa 3650Gen 6.5August 1, 2026
NSa 2650Gen 6.5May 1, 2026
SOHO, SOHO W, TZ300P, NSa 9250, NSa 9450, NSa 9650Gen 6 / 6.5April 16, 2026
NSv 10 to NSv 1600 (virtual)Gen 6April 16, 2026
SuperMassive 9200, 9400, 9600, 9800Gen 6February 20, 2026
NSsp 12800, NSsp 12400Gen 6.5February 20, 2026
TZ300, TZ300WGen 6January 23, 2025
NSA 2600Gen 6March 8, 2024
12
Rows of models in the notice, all past end of support
0
Patches for any severity, per SonicWall
Oct 1
Latest end-of-support date (2026)
Gen 8
SonicWall's recommended replacement

Why SonicWall says this is urgent

SonicWall gives these reasons in its notice. We report them as its argument, and some rest on third-party figures that we have not checked.

  • Edge devices and VPNs are a favourite way in. SonicWall cites Verizon's 2025 breach report as saying they were the target in 22% of breaches that began with an exploited vulnerability, up from 3% a year earlier.
  • Fixes can point at unpatched devices. When a flaw affects several generations, the supported ones get a fix and Gen 6 does not, so the public advisory can show attackers where to look.
  • It has happened before. SonicWall cites CVE-2024-40766 (CVSS 9.3), which affected Gen 5, Gen 6 and early Gen 7 firewalls and was reported as exploited in the wild. Supported firewalls received a fix.
  • SonicWall says SonicOS 8 has been hardened with AI-assisted security testing and SonicOS 6.x has not.

This site's reading: the notice is also a sales prompt, since the recommended answer is a new SonicWall product. That does not make it wrong. A device that can no longer be patched is a real risk, and the interim steps are sound whichever vendor you choose next. For how to defend devices facing the internet in general, see how to defend VPN devices and remote access.

What is known and not known

ItemWhat was publishedStatus
ScopeAll Gen 6 and 6.5 firewalls on SonicOS 6.x, including NSvConfirmed (SonicWall notice)
End-of-support datesThe table above, from March 2024 to October 2026Confirmed (SonicWall notice; Product Life Cycle tables not read separately)
PatchesNone for any severityConfirmed (SonicWall notice)
New vulnerabilityNone named in the noticeNot stated
Active attacks on Gen 6SonicWall says it expects internet-facing units to be targeted. No campaign is namedExpectation only
Number of units still onlineNot statedNot known

If someone else runs your firewall

Ask your reseller, maintenance contractor or managed service provider three things:

  • Which of our firewalls are Gen 6 or Gen 6.5, and is SSL VPN or WAN management open on any of them?
  • When will they be replaced, and who pays?
  • Until then, which of the interim steps are already applied?

Timeline

  1. 6 November 2026

    SonicWall publishes the security advisory for SonicOS 7.3.4 and 8.2.3 (Gen 7 and Gen 8). See the SonicOS SSL-VPN SAML flaw CVE-2026-19868.
  2. 18 November 2026

    SonicWall publishes "Retire Unsupported Gen 6 Firewalls".
  3. 21 November 2026

    This site reads the notice and publishes this article.

Sources

Attack steps and indicators of compromise (IOCs) are not included. Last verified: November 21, 2026.

Update history

2026-11-21: First report. Based on SonicWall's product advisory of November 18, 2026.

Latest breaking reports

All breaking reports →

FAQ

QWhat did SonicWall announce?
A

On 18 November 2026 SonicWall published a product advisory telling customers to replace Gen 6 and Gen 6.5 firewalls running SonicOS 6.x, including Gen 6 NSv virtual firewalls, and to retire them without delay: the notice says Gen 6 should no longer be used in production. All listed models have reached end of support, so SonicWall releases no firmware updates or security patches for them, including for critical vulnerabilities.

QIs this a new vulnerability?
A

No. The notice does not announce a specific flaw. It says that any vulnerability found in these devices from now on will stay unpatched, and that SonicWall expects internet-facing Gen 6 firewalls to be actively targeted.

QWhich models are covered, and when did support end?
A

Every Gen 6 and Gen 6.5 model on SonicWall's list, from NSA 2600 (8 March 2024) and TZ300 (23 January 2025) to the models whose support ended on 1 October 2026, such as TZ350, TZ500, SOHO 250 and the NSA 4600, 5600 and 6600. The full table is in this article.

QCan I buy support or get an exception for a critical flaw?
A

No. SonicWall says support for Gen 6 can no longer be bought or renewed, no further firmware will be released, and there is no exception for critical vulnerabilities.

QWhat can I do if I cannot replace the firewall right away?
A

SonicWall lists interim steps that reduce exposure but do not make an unsupported firewall secure: disable WAN management (HTTPS, SSH and SNMP on WAN interfaces), disable SSL VPN or restrict it to known source addresses, enforce multi-factor authentication on remote-access and admin accounts and reset local passwords, disable unused services and interfaces, and monitor logs for unusual logins, configuration changes and traffic.

QDo I have to rebuild my configuration on a Gen 8 firewall?
A

According to SonicWall, no. Supported SonicOS 6.5 settings can be imported into Gen 8 with the in-product import or the NSM Migration App. SonicWall recommends planning the migration with an authorized partner.